Treat a move as a scheduled event
Most move-day problems start before the truck arrives. The gate has no idea a move is happening, so the crew calls a resident who is carrying boxes, rings a call box that goes unanswered, or waits at a keypad while the driver tries codes. The simplest fix is a short written move request that goes to the manager or the person who administers the gate.
The request does not need to be complicated. It should tell the person who controls access what is coming and when, so that access can be set up on purpose instead of improvised at the curb. Many communities also use the same request to confirm elevator or loading-area reservations, certificates of insurance from the mover, and quiet-hour rules. Those are management decisions, not gate settings, but they belong on the same form so the gate does not become the only place the process is checked.
- Unit and the resident or owner making the request
- Moving company name and the vehicles expected, including truck size where large vehicles are limited
- Move date and an arrival and departure window
- Which entrance the crew should use, and a phone number someone will actually answer
- Any elevator, loading-area, or insurance paperwork the community requires
Give the crew access that starts and stops with the window
A moving crew is a vendor for a day. It should not receive a resident's remote or the permanent gate code. Where the system supports it, add the mover as a temporary visitor or vendor entry that is valid for the scheduled window. Where it does not, a manager or guard can enter the crew from the approved move list. The vendor and delivery access guide covers the choices in more detail, including how to keep an unattended entry from becoming a standing entry.
Handing the crew a standing code is the most common shortcut and the one that causes the most trouble later. The code gets reused for the next move, passed to a friend, or forwarded to a delivery driver. If the only temporary method a gate has is a shared code, change that code after the move or ask the technician what the controller can do instead.
- Temporary visitor or vendor access limited to the move window
- No resident remote, tag, or app login handed to the crew
- A manager or guard list for gates that cannot issue time-limited entries
- A shared code, if one is the only option, changed after the move
Do not leave the gate propped open with no one standing there
A resident who is making forty trips from a unit to a truck will want the gate open. That is understandable, and it is also when the entrance is least protected. An open gate with no one watching it lets in any car that happens to drive up, and it defeats the photo eyes, the entry log, and the camera clips that a board relies on after an incident.
If the community allows a gate to stay open during a move, write down who is allowed to do it and for how long. A named person should stand at the gate while it is open, and the gate should be closed whenever that person steps away. Do not tie a gate, wedge a sensor, or defeat a safety device to keep it open. A held-open mode on the operator, if the community uses one, should be set up by a technician, have a clear way to end it, and not be left on when the move is over. The gate tailgating guide explains why a gate that stays open is a bigger problem than the slow trips it was meant to avoid.
- A named person at the gate for as long as it stays open
- The gate closed again whenever that person leaves
- No tying, wedging, or disconnecting of sensors or photo eyes
- Any held-open feature set up by a technician and turned off at the end of the move
Send trucks to the entrance that can take them
Not every entrance suits a moving truck. Resident lanes can be too narrow or too low, a gate can swing into the road, and a call box in the wrong spot can leave a long vehicle blocking traffic while it waits to be let in. Some communities send large vehicles to a service or commercial entrance and keep the main lanes clear for residents.
Whatever the community chooses, tell the mover in writing which entrance to use. A driver who arrives at the wrong gate can lose part of the reserved window and may back across a lane to correct it. If a community has a single entrance, plan the timing so a truck waiting for entry does not block residents and so emergency vehicles keep a clear path.
- The entrance, lane, and loading area written on the move request
- Clearance and turning room for the vehicles expected
- A call or keypad location that does not leave a truck blocking the street
- A clear path kept for emergency vehicles while a truck waits
Close the loop on credentials after the move
A move-out is when old access should end. Remotes, tags, app logins, individual codes, and any amenity credentials for the household should be turned off, and devices should be collected where the community requires it. A move-in is when new access should start, with the new household entered under its own unit rather than a copy of the previous resident's credentials.
The resident credentials guide covers how to issue and revoke access by unit. Pool and fitness credentials should follow the same dates, as described in the amenity access guide. For communities with rotating stays rather than annual leases, see the short-term rental guest access guide.
- Old resident credentials turned off on the move-out date
- Collected remotes or tags matched to the unit that returned them
- New credentials issued under the incoming unit record
- Amenity access added or removed on the same dates
- The temporary crew access confirmed expired
Use the entry log and cameras to settle disputes
Move days produce more disputes than most days: a bent gate arm, a blocked lane, a truck that arrived outside its window, or a resident who says the crew was let in by someone else. The entry log and a camera view of the lane let a manager see what happened without guessing. They also show whether the temporary access ended when it should have.
Boards should decide ahead of time who may review the log and camera clips and how long they are kept, so a move-day complaint is handled the same way for every unit. The camera placement guide covers where views should point and who should be able to see the footage.
- Entry log entries that show who was admitted and when
- A camera view of the entry lane that shows trucks and any gate-arm contact
- A written rule for who can review clips after a complaint
- A short note on the move request when something goes wrong, so the next move benefits
What a technician can check before a busy move season
Move-out and move-in activity clusters around the end of a month and around the start of a school year or a season. A visit beforehand is easier than a repair in the middle of a move. A qualified technician can confirm that the gate operator, photo eyes, edge sensors, and loops are working, that the close timer matches how trucks and residents actually use the lane, that visitor and vendor entries can be time-limited, and that the keypad, call box, or intercom is working and easy for an unfamiliar driver to find.
Florida Security Concepts reviews the entrance during an advanced consultation, looks at the truck path and the gate timing, and writes down which temporary-access options the controller can support, without recommending hardware before seeing the site. Ask about it when the board or manager is planning for busy move periods.
- Photo eyes, edges, and loops tested and monitored by the operator
- Close timer reviewed against real truck and resident traffic
- Temporary visitor or vendor entries confirmed to expire on their own
- Keypad, call box, or intercom checked for a driver who has never been there
